Temperature probe D111SQ/RJ

The D111SQ contact temperature sensor is used to measure indoor or outdoor air temperature in connection with SONTEK D201, D202, D203, D207, D208, etc. master clocks and LED clocks. The measured temperature range is -55°C to +79°C.

DESIGN

CABLE LENGTH

For request

Price on request

Product number 19130008

Request for price offer simply with green button "Request price". It works similar to cart, but It will create price request instead of order.

D111SQ -FEATURES

D111SQ is a digital temperature sensor. The measured temperature is displayed only on the connected SONTEK device, it cannot be used separately. It is most often used in connection with digital clocks D202, D203, D208. It is also possible to connect to the D201 control panel with the necessary equipment (it is necessary to select the THERMOMETER INPUT option - yes). The control unit then sends the measured temperature to the connected digital clock (the temperature is only sent when synchronizing via a seconds slave line, RS485 or DHF).

The D111SQ thermometer in the version without a connector connects to the D201, D208 devices. The thermometer with a connector connects to the clocks D202, D203 and D207. In most cases, the thermometer is not part of the clock and is therefore ordered separately. The thermometer is not calibrated, but if necessary, temperature correction can be made on the clock itself. In the case of surface temperature measurement, it is possible to attach the sensor to the object on which we want to measure the temperature, if we measure the air temperature, we attach the thermometer to the cable so that the measured temperature is not affected by a nearby object. We always place the thermometer in a shady place, never in a sunny place.

D111SQ - BASIC KONFIGURATION

Contact sensor for temperature measurement in the range -55°C- +79°C.
The chip is factory calibrated with an accuracy of +/- 0.5°C (for the range 0-70°C)
The cable of the sensor has a length of min. 2 m
The cable is terminated with tinned wires designed for classic terminal block or WAGO terminals, or RJ connector

THERMOMETER CONFIGURATOR OPTIONS - D111SQ

The configurator allows modification of the minimum equipment according to customer requirements. In this chapter there is a description of all options

SENSOR CABLE LENGTH:

2M – the sensor with a 2-meter cable as standard
5M - the sensor with a 5-meter cable
10M - the sensor with a 10-meter cable
20M - the sensor with a 20-meter cable

DESIGN:

WITHOUT CONNECTOR - the sensor is supplied as standard with stripped tinned wires for connection to the terminal block
WITH RJ CONNECTOR – sensor with a cable terminated with an RJ6p6c type connector

NOTE: It is not advisable to extend the sensor cable. A sensor with the required cable length must be ordered.

NOTE2: Sometimes referred to as D111RJ (in case of version with RJ connector)

TECHNICAL FEATURES:

Power: 5VDC
Measured themperature: -55 °C až +79 °C
Accurancy:
Presnosť
Rozsah
+/-0.5°C
0°C až +70°C
+/-1°C
-40°C až 0°C
+/-1°C
+70°C až +79°C
+/-2°C
-55°C až -40°C

Presnosť	Rozsah
+/-0.5°C	0°C až +70°C
+/-1°C	-40°C až 0°C
+/-1°C	+70°C až +79°C
+/-2°C	-55°C až -40°C