BASIC TYPE DIVISION:
D202 clock is available in following configurations:
- single-sided and double-sided.
- 4-digit (HH:MM) or 6-digit (HH:MM:SS) display .
- 57 mm or 100 mm digit height.
- selectable display color
- included all D202H and P functions - slave line synchronization, GPS sync, two temperature measurements with contact thermometer, stopwatch and countdown timer.
- optional functions - serial data interface RS485, DHF and NTP synchronization, infrared thermometer, humidity measurement with the possibility to set the sound frequency, beep duration, start time programming or as a time signal (only to order).
NOTE: It is valid for the entire type range that GPS input can be used also for connecting DCF receiver (e.g. D110SQ/RJ)
IMPORTANT:
- Remote control D200 is necessary to install the clock. After installation remote control is needed only occasionally, e.g. for setup of clock without synchronization. Therefore one remote control is sufficient for organization with several of these clocks. Remote control is not included in clock accessories and needs to be ordered separately (D200) in needed quantity.
- Clock is for interior use only.
FEATURES - D202P/057/4/D: - Double-sided indoor digital clock with HH:MM time display format and 57 mm digit height.
- Metal casing with transparent acrylic glass and coloured side panels. Dimensions: 285 x 100 x 95 mm
- Independent operation without synchronization or slave impulse line synchronization. If SONTEK master clock is used, time and date are set up automatically.
- GPS receiver input, time and date is set from GPS information
- Backup RTC (Real Time Clock) circuit ensures independent operation and time adjustment even during interruption of power supply (min. 3 days).
- On top of basic synchronization it is possible to add synchronization via 485 link or input for external DHF receiver (wireless transmission) or synchronization via Ethernet from NTP server (private or public via internet).
- Infrared remote control is necessary, but not one for each clock (remote control D200 needs to be ordered separately).
- Standart internal power supply 230V/50Hz (EURO plug). It is possible to choose also external power supply adapter or PoE (only for NTP synchronization version).
- Automatic switch between displayed information (time/date, time/temperature, time/date/temperature) in adjustable frequency from 1 to 9 seconds.
- Contact thermometer T1 input is standard accessory (thermometer D111SQ/RJ needs to be ordered separately).
- Stopwatch and countdown timer in M:SS or H:MM format controlled by remote control, option to display time split.
- Reverse timer ("New Years Eve" mode) - time until midnight is displayed.
- 9 levels of display brightness setup or auto control according to surrounding light conditions.
- Designed for use in conference rooms, reception rooms, offices, studios,...
MINIMAL CONFIGURATION
- Double-sided LED display 4x57mm - red
- Slave minute/second impulse line input
- GPS receiver input
- Contact thermometer T1 input (probe D111SQ/RJ, needs to be ordered separately)
- Contact thermometer T2 input (probe D111SQ/RJ, needs to be ordered separately)
- Power supply 230V/50Hz, Euro connector
CONFIGURABLE OPTIONS
The configurator allows modification of minimum configuration according to
customer requirements. This chapter describes all possibilities.
COLOUR:
- RED – Red colour LED display. Standard option.
- GREEN – Green colour LED display.
- YELLOW – Yellow colour LED display.
- BLUE – Blue colour LED display.
SENSOR 2:
There are two inputs for temperature and humudity measurement to connect probes. Option allows to choose the probe.
- Contact thermometer T2 input, standard option (probe D111SQ/RJ, needs to be ordered separately)
- Infrared thermometer input (probe D511RJ, needs to be ordered separately)
- Humidity probe input (probe D411RJ, needs to be ordered separately)
ADDITIONAL SYNCHRONIZATION:- NONE - only slave impulse line and GPS synchronization.
- DHF - Input for wireless DHF transmitter/receiver D215. If main synchronization is used (for instance GPS receiver is connected), communication is set to transmit coded time protocol (MASTER). If main synchronization is not used, clock is in receive mode (SLAVE). Several clocks in "SLAVE" mode can be connected to one "MASTER" clock and be synchronized by this "MASTER" clock. Information about temperature can also be communicated via this protocol.
- RS485 – Serial data line 485 allows time distribution between several clocks by two wires. The communication is set to transmit coded time protocol (MASTER function), if main synchronization is used (for instance GPS receiver is connected). Communication is set to receive (SLAVE), if main synchronization is not used.
Several „SLAVE" clocks are synchronized by one "MASTER" clock.
Communication protocol allows time, and also temperature distribution.
- NTP+DHF OUT – connector for NTP web server synchronization. Configuration allows set two IP addresses. The time is synchronized from NTP server. You can choose your private NTP server or NTP server on the network. Time information received from NTP server is sent via wireless transmission to other clocks in time distribution network.
- NTP+485 OUT – connector for NTP web server synchronization. Configuration allows set two IP addresses. The time is synchronized from NTP server. You can choose your private NTP server or NTP server on the network. Time information received from NTP server is send via RS485 serial link to others clocks in time distribution network.
POWER:
- 230V/50Hz – built-in power supply, Euro connector
- 12VDC – safe voltage power supply 12VDC. DC connector 5,5/2,1 mm.
- PoE - power over ethernet, only if additional synchronization is NTP